KAMRI LTD.
SMD Punching-Feeding Module
SMD Punching-Feeding Module is designed for automatic separating of the SMD components from a feeding tape and further transporting of the component to a robot's picking zone.
Description
The Feeding Module has following basic features:
• Separation. Component separation is realized by pneumatic puncher with gentle fixation of the component during process;
• Gripping. Single component gripping and transportation is achieved by pneumatic manipulator with vacuum pad;
• Transportation. Final transportation to the outgoing position is realized by timing belt driven by DC gear motor.
Construction
The Module has own control and pneumatic systems.
This Feeding Module is designed for specific product and combined work with Autotronik BS390 machine. However it could be redesigned according customer requirements for other product as well as for SMT machines from other manufacturers.
Punching-Feeding Module has following parameters:
  • Outside dimensions (w/o bobbin) 700x1433x550mm (LхWхH);
  • Power supply 24 VDC
  • Power consumption 15 W
  • Mass 10 kg
  • Initial feeding tape at bobbin
  • Drive electro-pneumatics
  • Capacity 30 components/min
  • Air pressure 0,6 MPa
  • Air consumption 15 l/min
CONTACT US:
GENERAL
Company: KAMRI SIA
VAT-code: LV40003577407
Address: Starta iela 5F, LV-1024 Riga, Latvia
Phone: +371 26 322 648
E-mail: kamri(at)kamri.lv
Web: www.kamri.lv

BANK: SEB banka
SWIFT: UNLALV2X
IBAN (EUR): LV25UNLA0050005339281

ALEXANDER MIKHEEV
Director
mobile: +371 26 322 648
e-mail: alex.mikheev(at)kamri.lv
Made on
Tilda